Assuming the wood is still fine, power wash off the previous paint/covering, sand anything that doesn't come off with the wash. Do a complete wash of the deck with a cleaning solution for decks. And then reapply a stain/seal.
Are you sure this isn't solid stain, not paint? It looks like it might be flaking off because the wood underneath looks to be rotten. Looking at the condition of the boards, you might be better off planning on replacing the wood. It looks to be in rough shape, there are no gaps between boards etc.
OK I don't want to labor the point but have you seen solid stain before? It looks like paint. It completely covers the wood. The stain in your home is transparent stain and you can see the grain through it. It's important to be sure because you can't pressure-wash solid stain off because it sinks into the wood. Paint sits on top of the wood. I guess worst-case scenario is you start to pressure wash it, it won't come off and you go back and solid-stain it anyway.
Ahh I see what you’ve saying. Sorry new to all this. Seems like I might have to replace few boards. looking at the nails, they seems very deep in the wood. Is there a way I can take them out. A normal drill would work or I need something specialized.
Yeah, strip out all the paint. I am not sure if I need to put something after cleaning that can help fill up the cracks. So far what I researched, wood fillers are not a good option. I am wondering if there is something else that I can use which can prolong the life.
I had similar issues with motion detection. Set it up as "optimal surveillance". Much better. Helps to also clean the doorbell once in a while as the sensors get covered in dust.
Do inverse Reddit. You see everyone is shitting on BA so just buy them especially if your horizon is long. There may be some short time pain but they aren’t going anywhere.
Assuming the wood is still fine, power wash off the previous paint/covering, sand anything that doesn't come off with the wash. Do a complete wash of the deck with a cleaning solution for decks. And then reapply a stain/seal.
Thanks. Any recommendations on what stain brand to use?
Readyseal is decent for the price
Thanks again. How long usually stain holds? Seems like I will have to do it every year.
It might go down further.
Are you sure this isn't solid stain, not paint? It looks like it might be flaking off because the wood underneath looks to be rotten. Looking at the condition of the boards, you might be better off planning on replacing the wood. It looks to be in rough shape, there are no gaps between boards etc.
Yeah its the paint not the stain. I have wooden floor inside and they are properly stained. But this is all painted.
OK I don't want to labor the point but have you seen solid stain before? It looks like paint. It completely covers the wood. The stain in your home is transparent stain and you can see the grain through it. It's important to be sure because you can't pressure-wash solid stain off because it sinks into the wood. Paint sits on top of the wood. I guess worst-case scenario is you start to pressure wash it, it won't come off and you go back and solid-stain it anyway.
Ahh I see what you’ve saying. Sorry new to all this. Seems like I might have to replace few boards. looking at the nails, they seems very deep in the wood. Is there a way I can take them out. A normal drill would work or I need something specialized.
Work as a senior Data scientist for a tech firm. Make about 185k in a LCOL city.
sanding first?
Yeah, strip out all the paint. I am not sure if I need to put something after cleaning that can help fill up the cracks. So far what I researched, wood fillers are not a good option. I am wondering if there is something else that I can use which can prolong the life.
Also, forgot to ask What product would you suggest for staining? Thanks again.
That’s chickweed. I believe 2,4d takes care of it
Thank you.
About 20%. No claims Ohio
Data scientist in a LCOL area. Total comp around 180k including bonus. Work around 30 hrs every week. Around 40-45 during deliveries.
Though time to be in tech right now especially if you’re non technical in a tech team.
Go to Florida, and then report back.
I was driving in Miami for few days. And my gosh I love Ohio traffic now.
workers peeing in bottle -> save time -> work extra -> more business -> more $$$$ -> buy calls? How did you ended up with puts.
I had similar issues with motion detection. Set it up as "optimal surveillance". Much better. Helps to also clean the doorbell once in a while as the sensors get covered in dust.
Hmm I am trying to find it. where is it ?? I tried looking in the motion section part I don’t see it. It just say standard and advanced.
I did something same for my fence. I paid down payment via check and rest in cash after it’s finished.
Reminds me of that guy went to Hawai'i and scuba dived, by the time he came back on land, his position completely blew up...
I rmeber that. I wonder what happened to him.
[удалено]
They are in
But but but fidelity charges $0.65 a contact!!!! 🙀
The fills are much much much better than RH. 0.65 is nothing in front of that.
You will see use of LP in a lot of optimization problem.
Netflix should make a series of few episode on this.
Never never never take counter offer.
It’s a good stock to wheel may be in few months when it drops to 10-15$ range.
I’m not who you asked but I used FreeTaxUSA for the first time this year and had a great experience.
Been using freetaxusa for few years. It’s really good.
Do inverse Reddit. You see everyone is shitting on BA so just buy them especially if your horizon is long. There may be some short time pain but they aren’t going anywhere.
Kubernetes : to run models, airflow for orchestration, Power BI, tableau , sql for analysis and ETL, GitHub and gitlab, Jupiter notebook,python.